联系我们

公司名称:XXX

电话:XXX

手机:XXX

联系人:XXX

地址:XXX

新闻动态
PVC塑胶地板该施工流程
PVC塑胶地板该施工流程:
PVC plastic floor construction process:
基层的条件不仅对安装的外观具有重要的影响,而且与地板的寿命和耐用性能相关。因此,基层应注意保持干燥、坚固、刚硬、光滑、平整、清洁并没有灰尘和油脂。
The condition of the base not only has an important influence on the appearance of the installation, but also is related to the life and durability of the floor. Therefore, the grass-roots units should be dry, firm, rigid, smooth, smooth, clean and free from dust and grease.
1.混凝土基层:新浇及现浇混凝土基层应付合安装PVC地板的标准,基层的设计应符合建筑物的静合载和动合载的设计强度要求。混凝土基层必须坚固而且完全干燥,表面形成光滑密实平整、没有凹凸、裂缝及痕迹缺陷。
1. Concrete base: New and cast-in-place concrete base should meet the standard of jointly installed PVC floor. The design of base should meet the design strength requirements of static and dynamic loads of buildings. The concrete base must be firm and completely dry, with smooth, compact and flat surface, no concave and convex, cracks and trace defects.
如果混凝土基层下有潮湿的基础,地面必须设有防潮层,防止潮气渗入。防潮添加剂和固化剂无法代替防潮层。每25毫米厚新浇混凝土基层应有至少一个月的干燥期。尽量在安装之前进行测潮试验。
If there is a damp foundation under the concrete base, the ground must be equipped with a moisture-proof layer to prevent moisture infiltration. Moisture-proof additives and curing agents can not replace the moisture-proof layer. Every 25mm thick newly poured concrete base should have a drying period of at least one month. As far as possible, the tidal test should be carried out before installation.

联系方式

  1. 公司名称:XXX
  2. 电话:XXX
  3. 手机:XXX
  4. 联系人:XXX
  5. 地址:XXX

版权 © 保定市塑胶地坪厂 网址:http://dipingp.89ix.com  推荐:pvc塑胶地坪,幼儿园塑胶地坪,epdm塑胶地坪

网站建设及优化保定遨游网络公司