PVC塑胶地板施工条件
Construction Conditions of PVC Plastic Flooring
施工场地需要整理干净，保证施工场地干净没有工具、器械、设备等杂物；地面清理干净无垃圾。能够保证工人到场就能施工的条件。
The construction site needs to be cleaned up to ensure that the construction site is clean and free of tools, equipment and other debris; the ground is clean and free of garbage. To ensure that workers can be on site construction conditions.
施工场地平整度：用水平尺测量，3米范围内高差≤2毫米（水泥地基一般是5毫米）。
Horizontal leveling of construction site: measured with a horizontal ruler, the height difference within 3 meters is less than 2 mm (cement foundation is usually 5 mm).
施工场地强度：无反沙、起包、脱层、开裂等现象。施工地面必须坚实、光滑平整、干燥、干净，地面的装修残留物质必须去除干净。
Strength of construction site: There is no phenomenon of anti-sand, pick-up, delamination and cracking. The construction ground must be firm, smooth, flat, dry and clean, and the remnants of the ground decoration must be removed.
施工场地温度：施工现场室内温度及地表温度，以18℃为宜，5℃以下以及35℃以上不能施工。
Construction site temperature: The indoor temperature and surface temperature of the construction site should be 18 C, and it can not be constructed below 5 C or above 35 C.
确保地面以下隐蔽工程已完工并保证质量，包括水电等。
Ensure that the concealed works below the ground are completed and the quality is guaranteed, including hydropower, etc.
避免交叉施工，交叉施工会严重影响施工进度和施工质量，并且很容易对地板造成不可恢复的损坏。
Avoid cross construction, cross construction will seriously affect the construction progress and quality, and it is easy to cause irreversible damage to the floor.